arrow_circle_down How To: Make a Reading Pillow
Reading Pillow Instructions
- Parlan/Iron on Vilene
I have a 2” rule when making pillows of any description.
Cut your fabric 2” larger than your finished pillow
The zip will be 2” shorter
For the piggy cushion I have made it an 18” finish to allow room for our cute appliques and wording. So cut at 20” and zip is 16”.
I have stitched out the pig in the 5x7 size to keep it small enough for the cushion.
Cut two squares of your fabric at 20” and overlock or zig zag stitch around all sides.
To insert zip, stitch the short distance on either side, stopping about half inch in from the edge. This is on the bottom seam of your pillow, important if you have a one way design fabric. Press open.
Turn over to the right side and just using two pins, pin at the top of your zip.
We are keeping the stitching central so as to keep the zipper pull tucked away when finished.
Stitch down left side keeping the edge of the fabric lined up with the centre of the zip. Then start stitching at the top again, doing the little section across the top, then pivot and go down right side, finishing across the bottom edge. Zip is done! Press lightly and leave aside until we are ready to attach the pocket.
Cut your matching fabric for the pocket at the same width as your cushion and 12” high. This will allow for a little trimming and the seams top and bottom. You can use the same fabric for the lining or just a matching homespun.
Press your parlan or similar on the back to give a nice embroidery surface.
Hoop with medium tearaway. Embroider your wording or any other cute ones you might like to add. Remember to mark your position of your pig (or alternative) to keep it all nicely lined up. Do not attach your pig until you have finished your embroidery. Lovely to embroider a name if required.
Then we are going to stitch on your pig. I chose a matching thread, or you could use an invisible thread to stitch her in place. I have gone right around the face but then just done the outer edges.
The front of your pocket is now complete.
The next step has a couple of options. I have trimmed it back and used a matching binding top and bottom with the pocket lining sitting behind with wrong sides together. The other option is to put the right sides together and stitch across the top and bottom and pulling it through like a sleeve. Then top stitch across the top, leaving the bottom one to do when attaching to the pillow.
Your pocket is now ready to attach to your pillow.
Place and pin it on your front panel just above the zip.
Top stitch the bottom of your pocket.
Pinning the rest to incorporate in your side seams.
Open your zipper a couple of inches to make for easy turning.
Bring the bottom of your cover up and over and pin in place.
Stitch the remaining three sides. Trim your corners.
Turn, press and you are done!!!
Note From Heather
Click link below to View and Download Tutorial
Posted: Wednesday 2 August 2017
★★★★★Thanks so much for this wonderful instruction on how to make this pillow. It's adorable!Posted: 2017-08-30 11:03 by Sherri Cook
★★★★★this is so cute - thank you for the tutorialPosted: 2017-08-20 00:57 by Sandra
★★★★★This is wonderful to get these instructions.
Would you share where the fabric came from.
You can Message me if you like.Posted: 2017-08-06 10:45 by Tommie
★★★★★This is the cutest thing. Thank you so much for the pattern I will be making this for my granddaughters.Posted: 2017-08-04 07:21 by Debra Ingle
★★★★★I will be making this pillow!Posted: 2017-08-04 01:28 by Mary
★★★★★thank you I hope to be able to make one soon and instructions like these are a wonderful help.Posted: 2017-08-03 17:20 by Jan Paine
★★★★★bonjour, vos réalisations sont magnifiques, merci de nous partager ces beaux coussins , cordialementPosted: 2017-08-02 23:54 by sofia